ZIGBEE Wireless One-Wire Wall-mount Switch

Wireless One-Wire Wall-mount Switch

MZ 600SS (Retrofit Applications) 

MZ 600SS wireless wall mount switch is a 802.15.4 based wireless control switch. It is specially designed to meet the crucial requirements in retrofit applications.

There are always times in upgrading your lighting fixtures with remote controlled capabilities. In most cases, the existing circuit wiring arrangements will not allow for such additional labor and material cost. Not to say to destroy the decorations.

With U600SS, no additional labor work and material cost will be adding up to your bill. No changes to the traditional wiring practices.

MZ 600SS is a device based on wireless communication standard 802.15.4 to provide residential users with 1-to-many control capability. Unlike the traditional remote control system designs,

MZ 600SS gains advantages of the DSSS (Direct Sequence Spread Spectrum) technology to counter the background noise.

．Complete adaption to existed retrofit lighting control applications

．No additional wire harness is needed.

．Quick and easy to install

．Compliant with the IEEE 802.15.4 digital communication standard.

．Convenient & compact control user interface is provided

．Two-way communication capability provided

．Provided action confirmed mechanism, alleviate from blind or faulty operations.

．Capable of conduct device addressing for more

．Power consumption:

a) Input #1: 100~110 VAC

b) Input #2: EU 220 VAC

．Wall switch design: 1/2/3-gang, X1/2/3 on/off switch

．Working temperature: -20~60℃

．Working humidity: 0~90% relative

．Dimension: (L/W/H) #1-123/76/50mm  #2-86/86/50mm

Voltage : AC 220V 50/60Hz
Performance Tolerance: -15% to +10% 187 ~~ 264V
    One gang: rated power resistive load (incandescent) 7-300W, capacitive load the (electronic fluorescent lamp / energy saving lamp), and the inductive load (transformer load, the motor drive) 9-150W;
       Two gangs: resistive load 7-400W, ≤ 200W per circuit capacitive loads and inductive load 5-150W;
        Three - gangs: resistive load 7-450W, ≤ 200W per circuit capacitive loads and inductive loads 3-150W;

Note: Two gangs and three gangs switch brought capacitive load and inductive load should not be less than the minimum total power 9W.

Load types of energy-saving lamps, incandescent, fluorescent

Operation: manual control, wireless remote control
Remotely control:  multi-control, scene, fully open, fully closed

Standby features
Single switch per ≤ 70μA standby current
≤ 85μA standby current total two-way switch
≤ 100μA standby current three-way switch

Security features
Overvoltage protection AC 462 ~ 500V
Surge Protection bleed power 600W/1mS
Each circuit-load protection has independent no-load detection

Relative Humidity: 10% to 93% (non-condensing)

MZ 600SS is a device based on wireless communication standard 802.15.4 to provide

residential users with 1-to-many control capability.

Unlike the traditional remote control system designs, U600SS gains advantages of the DSSS (Direct Sequence Spread Spectrum) technology to counter the background noise.